Our test center offers you trials on:

Type of Plant

Applications

Operating Range

Anciliaries

Falling Film Evaporator

Low viscosity fluids

Feed: 100-500 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar

Pumps
Separating vessel
Condenser
Cold trap
Product tanks
Vacuum unit

Vertical Thin Film Evaporator
with different rotor types

Heat sensitive, viscous and fouling products

Feed: 20-100 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar
Viscosity: £ 50 Pas  1)

Vertical Thin Film Evaporator
with different rotor types

Feed: 50-300 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar
Viscosity: £ 50 Pas  1)

Vertical, conical shaped Thin Film Evaporator type SAKO^® KV

Feed: 50-300 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar

Viscosity: £ 50 Pas  1)

Horizontal, conical shaped Thin Film Evaporator
Type SAKO^® KH

Feed: 50-300 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar
Viscosity: £ 50 Pas  1)

Short Path Evaporator type SAMVAC^®

Temp. sensitive high boiling products

Feed: 20-200 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar
Viscosity: £ 30 Pas  1)

Same as above
plus high vacuum pump set

Type of Plant

Applications

Operating Range

Anciliaries

Filmtruder / Viscon for
devolatilization with different rotor types

Polymer solutions or high viscous products

Feed: 20-200 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar
Viscosity:
£ 10'000 Pas   1)

Melt extruder/ kneader static mixer, heat exchanger for preheating, flash vessel, stirred heated feed vessel
condenser
cold trap

Filmtruder / Viscon for reaction with different rotor types

Reactions / Poly-
condensations, Polymer-solutions or high viscous products

different discharge system
vacuum unit

Reactotherm^® for batch operation

Pasty, sticky and high viscous products

Feed: 5 ltr (batch)
Heating: 20-350 °C
Operating Pressure:
20 mbar - 7 bar

Reactotherm^® for continous operation

Feed: £ 50 gk/hr
Heating: 20-350 °C
Operation Pressure:
20 mbar - 7 bar

Twin shaft mixer reactor type Reasol^® with high degree of self-cleaning

Reactions / Poly- condensations, Polymer-solutions or high viscous products (slurries)

Feed: 20 to 250 kg/hr
Heating: up to 350 °C
Operating: 1-1013 mbar

Type of Plant

Applications

Operating Range

Anciliaries

Convection Processor
type CONVEX^®

Filter cakes, sandy, granular and fibrous products or powder. Pasty feed products in special cases.

Feed: 50-300 kg/hr Heating: 80-1000 °C Gas rate: 1500-2000 m³/h

Cyclone
Bag filter Scrubber
Air heater by steam
Natural gas fired heater

Vertical Thin Film Dryer,
type CP

Pumpable solutions and slurries.

Feed: 20-150 kg/hr
Heating: 20-350 °C
Operating Pressure:
1-1013 mbar

Stirred and heated
feed and concentrate vessels, pumps, discharge lock, demister, cold trap,
vacuum unit

Horizontal Thin Film Dryer,
type D

Slurries, sludges, filter cakes, powder

Feed: 20-150 kg/hr
Heating: 20-350 °C
Operating Pressure:
20-1013 mbar

Segment Disc Dryer
type Rovactor

Filter cakes, powder, granular products, pellets.

Reactotherm^® RTD 8 for batch operation

Pasty, sticky and crusting products, sludges

Feed: 5 ltr (batch)
Heating: 20-350 °C
Operating Pressure:
20 mbar - 7 bar

Reactotherm^® RTC 16 for continuous
operation

Feed: £ 50 kg/h
Heating: 7bar
Operating Pressure:
20 mbar - 7 bar